KIDZBricks

• Introduction
  • Concepts
  • Parts List
  • KIDZBricks Series of Sets
• Quick Start
  • Power On
  • Direct Control: Controlling the Motor
    • Preparation
    • Steps:
    • Demonstration
  • Logical Control: Encoder Sensor Controls Motor
    • Preparation
    • Connect Sensor and Actuator
    • Demonstration
  • Programming Control: Remote-Controlled Car
    • Demonstration Effect:
    • Hardware Setup:
      • Preparation
      • Steps:
      • Connect Motors
    • Software Programming
      • Install the Software
      • Steps for Programming
    • Demonstration
• Sensor Introduction
  • KIDZBricks Hub
    • Overview
    • Structural
    • Specifications
    • Usage Introduction
  • Sensor Introduction
    • Gyroscope Sensor
      • Introduction
      • Structure
      • Specifications
      • Usage Instructions
    • Distance Sensor
      • Introduction
      • Structure
      • Specifications
      • Usage Instructions
    • Encoder Sensor
      • Introduction
      • Structure
      • Specifications
      • Usage Instructions
    • Sound Sensor
      • Introduction
      • Structure
      • Specifications
      • Usage Instructions
    • Multifunction Gesture Sensor
      • Introduction
      • Structure
      • Specifications
      • Usage Instructions
  • Output Sensor
    • Servo Motor
      • Introduction
      • Structural
      • Specifications
      • Usage Instructions
    • Touch Color LED Sensor
      • Introduction
      • Structural
      • Specifications
      • Usage Instructions
• Feature Overview
  • Direct Control Mode
    • The Hub Controls Servo Motor
    • The Hub Controls Touch Color LED Sensor
  • Logic Control Mode
    • Encoder Sensor
    • Gyroscope Sensor
    • Distance Sensor
    • Sound Sensor
    • Multifunction Gesture Recognition Sensor
  • Logic Restriction Mode
  • Programming Control Mode
    • KIDZBricks Mobile Programming Mode
    • KIDZBot-Scratch Programming Mode
    • MicroBlocks Programming Mode
• Mobile Coding Software
  • Software Installation
    • Android Systems
    • iOS Systems
  • Interface Guide
    • Login Interface
    • Bluetooth Window
    • Settings Interface
    • Remote Control Interface
    • Remote Control Settings Interface
    • Console Interface
    • Beginner Version
    • Advanced Version
    • Model Training Page
      • Model Training Selection Interface
    • Project Management Page
    • Image Training Page
  • Block Command Instructions
    • Junior edition
      • Yellow (Trigger Category)
        • When Program Starts
        • When Gyroscope Sensor ()
        • When Gesture Sensor Detects ()
        • When Encoder Sensor ()
        • When Sound Sensor Detectes ()
        • When Distance Sensor Detects ()
        • When Button () is Pressed
      • Blue (Motor Category)
        • Set Motor Speed to ()
        • Motor () Rotates Clockwise
        • Motor () Rotates Counterclockwise
        • Motor () Stops Rotating
        • Move Forward
        • Move Backward
        • Turn Left
        • Turn Right
        • Stop
      • Purple (Lighting Category)
        • Set Touch LED Sensor to Color ()
      • Orange (Control Category)
        • Wait () Seconds
        • Repeat () Times
        • Repeat Continuously
    • Advanced edition
      • Control
        • Wait for ( ) second / millisecond
        • Loop
        • Repeat ( ) times
        • if ( ) then ( )
        • if ( ) then ( ) else ( )
        • Exit loop
        • Exit the program
      • Motor
        • Read the angle of the servo motor on port ( ).
        • Run the servo motor on port ( ) at speed ( ) in ( ) direction.
        • Run the servo motor on port ( ) at speed ( ) in ( ) direction for ( ) (revolutions/degrees/seconds).
        • Set the current position of the servo motor on port ( ) to zero.
        • Run the servo motor on port ( ) at speed ( ) to ( ) degrees.
        • Stop the servo motor on port ( ).
      • Motion
        • Set the running motor to ( ) and ( ).
        • Move ( ) running at ( ).
        • Move ( ) running at ( ) for ( ) (rotation/degree/second).
        • Stop the motor on ( ).
      • Sensor
        • Port ( ) compare distance to ( ).
        • Port ( ) compare Sound to ( ).
        • Port（）Encoder（）
        • Port（）Gyroscope Sensor（）
        • Port（）Gesture Sensor（）
        • Button ( ) on main controller is pressed.
        • Button ( ) on remote control is pressed.
        • Port（）Axis（）
        • Port（）Encoder
        • Port（）Distance
        • Port（）Sound
      • Light
        • Touch LED Module Port（）is（）
        • Indicator Position（）is（）
      • Operator
        • （）+（）
        • （）-（）
        • （）*（）
        • （）/（）
        • （）>（）
        • （）<（）
        • （）=（）
        • （）and（）
        • （）or（）
        • not（）
        • Generate a random number between ( ) and ( )
      • Variable
        • Create a variable.
        • Assign（）to（）
        • Change / Increase () by ()
        • Variable name
      • AI
        • training model
        • recognition window
        • recognition of class （） confidence
        • recognition result is class （）
  • User Guide
    • Required Permissions
    • Connecting Devices
      • Connection Steps:
    • Creating a Project
    • Online Mode (Beginner Version)
    • Offline Mode (Advanced Version):
    • Renaming the Bluetooth Device
    • AI
• KIDZBot Scratch Software
  • Software Installation
    • System Requirements
    • Quick Installation
      • Download
      • Windows System Installation Steps
  • Interface Guide
    • Toolbar
    • Editing Interface
  • User Guide
    • Drawing the Stage
      • Adding Characters
      • Adding Background
      • Making Characters Move
        • Example:
        • Effect Demonstration
    • Connecting Hardware Devices
      • Connecting Hardware Devices
      • Coding Hardware Devices
        • Example:
        • Coding Content
        • Effect Demonstration
• MicroBlocks Software
  • Software Installation
    • Running MicroBlocks
      • Browser (Recommended)
      • Windows
      • macOS
        • Troubleshooting
    • Download Extension
  • Interface Guide
    • Toolbar
    • Editing Interface
  • Block Command Instructions
    • Controller
    • Sensor
    • Actuator
  • User Guide
    • Adding Extensions
    • Setting Up the Motherboard
    • Connecting Devices
      • Wired Connection
      • Wireless Connection
    • Starting Coding
    • More
• Course Case
  • Introduction
  • Summary
• Firmware Upgrade Guide
  • KIDZBricks Hub Firmware Upgrade
    • Method 1:
    • Method 2:
  • Servo Motor Firmware Upgrade
• Failure Analysis and Solution
  • Unable to Detect Bluetooth in the Programming Software
  • KIDZBricks Hub Won’t Turn On
  • KIDZBricks Hub Buttons Not Controlling Actuators
  • Delayed Response of the Start Button in Advanced Programming
  • Motor Not Working Properly in Projects
  • Gesture Recognition Sensor Not Controlling/Freezing
• Update Log
  • Firmware Update Log
    • KIDZBricks Hub Firmware Update Log
    • Servo Motor Firmware Update Log
  • Software Update Log
    • Mobile Programming Software
      • Android
      • iOS
    • KIDZBot-Scratch Programming Software
    • MicroBlocks Extension